An arch bridge, a crane boom, a dome over a stadium, a Ferris wheel …. these are all special structures. Often a unique design, sometimes less exclusive. But always with special demands for the steel they are constructed with.
More and more the designer …
Especially for the on – and offshore market, Bumaco is ordering tubes (pipes) to our own specifications. With extra and/or more stringent testing requirements then most applicable standards are asking for. Therefore the tubes generally will meet the specific and often project-related, demands of the customers.
Although the API 5L standard is the starting point for each specification, the tubes are certified to at least three standards. So they are not only suitable for construction purposes, but also can be used for piping. Or for the manufacturing of manifolds, bends and other steel components.
|SMLS 01||Seamless tubes to API 5L X52 N PSL2 (QT when necessary), EN 10225 S355G15, ISO 3183 L360 PSL2 and NORSOK M120 MDS Y27|
|SMLS 02||Seamless tubes to API 5L X65 QT PSL2, EN 10225 S460G6, ISO 3183 L450 PSL2 and NORSOK M120 MDS Y 47|
|SMLS 03||Seamless, small OD, tubes to API 5L X65 Q PSL2|
|LWP 01||Longitudinal, submerged arc welded pipes to API 5L X52 PSL2, ISO 3183 L360 NE PSL2 (sometimes to EN 10208 L360NB) and EN 10219 S355J2H|
|LWP 04||Longitudinal, submerged arc welded pipes to API 5L X65 M PSL2, ISO 3183 L450 ME PSL2 and EN 10219 S460 MLH|
All tubes are produced by “West European” mills and with a certificate EN 10204 – 3.2 by Lloyds
Next to these specials, Bumaco also supplies tubes and pipes to the usual standards as EN 10210, EN 10219, ISO 2938, EN 10297 etc.